37/EN
Setting the Rinse Aid Amount
1. Press ON/OFF button to turn on the
machine.
2. To enter the settings menu, press the
arrow buttons and then enter the Settings
Menu screen.
3. When you go the Settings Menu screen,
press the “Select” button and enter the
Settings Menu
4. Press the up and down arrow buttons in
the Settings menu until you see the “Rinse
Aid” menu on the screen.
5. Press “Rinse Aid” button where you see
the “Rinse Aid” menu.
6. In the rinse aid button press + and
- buttons to set the rinse aid at an
appropriate level. Apply the setting by
pressing selection button.
7. Go back to the Settings Menu by
pressing Back button.
When Rinse Aid is at 0, no rinse aid will be
added to the washing program.
When Rinse Aid is at 1, one dose of rinse
aid will be added to the washing program.
When Rinse Aid is at 2, two doses of rinse
aid will be added to the washing program.
When Rinse Aid is at 3, three doses of
rinse aid will be added to the washing
program.
When Rinse Aid is at 4, four doses of rinse
aid will be added to the washing program.
After passing the salt and rinse aid
warning screens, the warning screens
will not be displayed. If “Not Used”
option is selected, the warning will not
be displayed until salt and/or rinse aid
is filled and subsequently depleted.
Water Outage Warning indicator
When the machine is not supplied with
water, the Screen Info Line will display
“No Water!” warning. When the water is
supplied, the warning will not be displayed.
SelfCare
(depends on model)
This programme is recommended to be
operated on each 1-2 months for machine
cleaning and necessary hygiene. The
programme should be operated while the
machine is empty.
In order to achieve an efficient result, it is
recommended to use together with special
machine cleaning agents.
Do not use this programme to
clean dishes. As it operates in high
temperatures, it is harmful for the
dishes.
When Water Outage Warning indicator
is lit, ensure that there is no water
outage and the water taps are not
closed. If water is running and the tap
is opened, contact Authorized Service.
Water Overflow Warning
If you see this warning on the Screen Info
Line, please contact Authorized Service.
Your machine may let in more water than
required due to various reasons.
Program end
When the program ends, “Program End”
message is displayed on the Screen Info
Line.
1. Press ON/OFF button to turn off the
machine.
2. Close the water tap.
3. Unplug the appliance from the outlet.
For energy saving, your machine will be
automatically shut down after a while
following program end or a program is
not initiated.
After washing the dishes, leave them
to cool down for 15 minutes in the
machine. If you leave the machine door
ajar during this period, your dishes will
dry faster. This will increase the drying
efficiency of the machine.