Grundig GNF 51030 W, Инструкция пользователя

Страница: 30 / 49

DISHWASHER / USER INSTRUCTIONS 29 / 48 EN
Operating the product
C
Your machine performs water
softening depending on the
hardness level of the supply
water. Remaining time displayed
towards the end in some
programmes can be different
from the time indicated at the
beginning due to this process.
The total time can also change
while the programme is running
depending on the ambient
temperature where your machine
is installed, temperature of the
supply water and amount of the
dishes.
C
Pay attention not to open the
door of the machine when it is
running. Stop the machine by
pressing Start / Pause / Cancel
key if you have to open the
door. Then, open the door of
the machine. There may be a
rush of vapour when you open
the door of your machine; be
careful. Close the door of your
machine and press Start / Pause
/ Cancel key again. Programme
will resume running.
Programme follow-up
You can follow-up the washing step in which
the current programme is in from the Display
Information line messages as well as from
the remaining time.
Messages related to Washing, Rinsing and
Drying steps will be displayed respectively
on the Display Information line while the
selected programme is running. Programme
step is shown as left aligned and the
remaining time is shown as right aligned. This
screen and bar screen alternate in every 10
seconds.
C
The machine will remain silent
in pause mode for some time
in order to remove the water in
the machine and on the dishes
completely and to have the
water softener cleaned, and then
it will resume running in drying
mode.
Child (Key) Lock
You may prevent other people from
interrupting and changing the programme
cycle and time delay while the machine is
running.
To activate the child lock:
1. Press and hold the Child (Key) Lock key
for three seconds.
2. A key sound comes from the buzzer
when the Child Lock key is pressed for
the first time. If the Child Lock key is
pressed and hold more, "Child Lock:
3", "Child Lock: 2", "Child Lock: 1"
and "Child Lock: On" are displayed
on the Display Information Line. If any
key other than On/Off key is pressed
while the Child Lock is active, "Child
Lock: Open" is displayed on the Display
Information line together with the
warning sound.
C
Child Lock prevents the selected
programme or functions from
being changed and disables the
Start / Pause / Cancel key.
C
Child Lock does not lock the
door of the machine.
C
If you turn your machine off by
using On/Off key at the end of
the programme, the Child Lock
will be deactivated automatically.