Grundig GML-1730M, Руководство пользователя

Страница: 6 / 14

AV2 Input: Connect a video source with coaxial cable (with Composite Video Signal) to
the BNC connector for AV2 mode.
AV2 Output: Here you can pick off the signal of the AV1 input and make it available for
other devices. If no cable is connected, the monitor automatically sets a 75
Ω resistance.
PLEASE NOTE:
The audio inputs only work if the appropriate video mode is enabled. (PC Audio - VGA /
AV Audio - AV1 or AV2). In PIP or POP mode, you can choose which of the two audio
sources will be played.
5. Turning the Monitor Off/On
PLEASE NOTE:
After pressing the “Power” button, it will take approximately 6 sec. until the monitor is
ready and the display is visible.
These are the various power states of the LED monitor represented by the different LED
colours on the POWER button:
BLUE: On
RED: Standby
BLANK: Off or No power supply
6. Switching the Monitor Source
- Press the "A" button to make the source menu visible.
- Press "+ / -" to choose the source from the modes “VGA”, “HDMI", “AV1”, “AV2”.
- Press "A" again to apply the selected source.
7. OSD Menu Configurations
- Press the "M" button to see the menu.
- Press "+ / -" to switch between the four menus.
- After having selected a menu, press "A" to select a menu item. Press "+ / -" to adjust
the settings of this item.
- To go to another menu, press the "M" button again and go with the "+ / -" buttons to the
desired menu. Press "A" again to select a menu item and press "+ / -" to adjust the
settings of this item.
4 English