Grundig GMI8500, Руководство по обслуживанию

Страница: 8 / 46

Flow-Chart for Disassembly Procedure
No. Item/Part Fig. Removal (Screw)
1 Side Case (L)
Unit Fig.1 4-Screws (F)
Fig.2 1-Screw (A)
1-Screw (B)
1-Screw (C)
3-Screws (D)
1-Screw (E)
Fig.3 Locking Tab (a)
Slightly open the Side Case (L) Unit.
Disconnect FP6004.
2 Front Case
Unit Fig.4 4-Locking Tabs (b)
Disconnect FP4002.
3 Main C.B.A. Fig.5 2-Screw (G)
Remove the Shield Case.
Disconnect the following connectors.
FP6002,
FP2001, PP301, FP701,
FP4001, FP2002, FP601, FP5001,
FP6001, FP1001, FP4002, PS3510,
PS1003
4 Cassette
Cover Unit Fig.6 1-Screw (H)
5 Rear Case
Unit Fig.7 1-Screw (K)
2-Locking Tabs (c)
6 EVF Unit Fig.8 2-Screws (L)
7 Mechanism
Unit Fig.9 3-Screws (M)
1-Screw (M’)
8 Lens Unit Fig.10 1-Screw (N)
9 Main Frame
Unit Fig.6 1-Screw (I)
2-Screws (J)
Fig.11 1-Screw (O)
7-Locking Tabs (d)
10 LCD Unit Fig.12 Remove the Barrier.
1-Screw (P’), 4-Screws (P)
Fig.13 1-Screw (Q)
2-Screws (R)
3-Locking Tabs (f)
Remove the LCD Case (Upper) U.
Disconnect FP901, FP902 and FP903.
2-Screws (S)
Remove the LCD Hinge Holder U.
Fig.14 1-Screw (T)
Remove the Monitor C.B.A., Back Light
U., LCD Shield Sheet, Diffusion Sheet,
LCD Frame, LCD Module, LCD Case
(Lower) U.
11 Back light Unit Fig.15 Remove the Polarization Sheet.
Remove the LCD Terminal Rubber and
Fluorescent Lump.
Fig.1
Fig.2
Fig.3
Fig.4
4 ADJUSTMENT PROCEDURES
4.1. DISASSEMBLY PROCEDURES
8