14
5.Preparation
•
Your refrigerator should be
installed at least 30 cm away from
heat sources such as hobs, ovens,
central heater and stoves and at
least 5 cm away from electrical
ovens and should not be located
under direct sunlight.
•
The ambient temperature of
the room where you install your
refrigerator should at least be
-5°C. Operating your refrigerator
under cooler conditions is not
recommended with regard to its
efficiency.
•
Please make sure that the interior
of your refrigerator is cleaned
thoroughly.
•
If two refrigerators are to be
installed side by side, there should
be at least 2 cm distance between
them.
•
When you operate your
refrigerator for the first time,
please observe the following
instructions during the initial six
hours.
•
The door should not be opened
frequently.
•
It must be operated empty without
any food in it.
•
Do not unplug your refrigerator. If
a power failure occurs out of your
control, please see the warnings
in the “Recommended solutions
for the problems” section.
•
Original packaging and foam
materials should be kept for
future transportations or moving.
•
The baskets/drawers that are
provided with the chill compartment
must always be in use for low energy
consumption and for better storage
conditions.
•
Food contact with the temperature
sensor in the freezer compartment
may increase energy consumption of
the appliance. Thus any contact with
the sensor(s) must be avoided.
•
In some models, the instrument
panel automatically turns off 5
minutes after the door has closed. It
will be reactivated when the door has
opened or pressed on any key.
•
Due to temperature change as a
result of opening/closing the product
door during operation, condensation
on the door/body shelves and the
glass containers is normal
Read the “Safety Instructions” section first!
