10
BASIC OPERATION
Make a Call
1.
Press the
»
«
or
» «
key, wait for a dial tone, then dial the desired
number.
2.
After finishing the conversation, press
»
«
key or place the cordless
handset into the charger.
The talk timer will be shown during talk.
Note:
In idle mode press and holding
»
«
or
»
«
for 1.5 seconds, the
number associated with the
»
«
or
»
«
key will dial out.
Pre-dialling
1.
When the handset is in idle mode, input the desired number.
2.
Press
»
«
key to cancel the wrong digit, input the correct one again.
If a pause is needed during dialing, press and hold 0P key for a while
and character “P” will be shown. A 3 seconds pause will be added while
dialing.
3.
Press the
»
«
or
» «
key, the number will be automatically dialled
out.
4.
After finishing the conversation, press
»
«
key or place the cordless
handset into the charger.
The talk timer will be shown during talk.
Adjust the Receiver and Speakerphone Volume
While the phone is in talk mode, press
»
+
«
or
»
–
«
key on the handset
to adjust the receiver or speaker volume of the handset. The display will
show the current volume level during adjusting.
Answer a Call
When the phone rings, the handset LED will flash and the LCD on the
handset will show “RINGING”. If you have subscribed to Caller ID serv-
ice from your local telephone company, the incoming call information
will be shown.
1.
Press the
»
«
or
» «
key to answer a call.
2.
After finishing the conversation, press
»
«
key or place the cordless
handset into the charger cradle.
Auto Answer
1.
If you set on the “AUTO TALK”, just need to pick up the cordless handset
from the charger cradle to answer the call directly, needn’t press
»
«
or
» «
key.
2.
After finishing the conversation, press
»
«
key or place the cordless
handset into the charger cradle.
Содержание GDT 400
Страница 1: ...DECT TELEFON KULLANIM KILAVUZU GDT 400...
