manualshive.com logo in svg

Grundig GCA-B0005B, Руководство пользователя

Поделиться
Скачать
Grundig GCA-B0005B Скачать руководство пользователя страница 4

15. LANGUAGE

19

16. CAMERA RESET

19

17. NEXT / BACK

19

18. EXIT

19

19. SAVE ALL

19

1. Available Versions

The built-in Wide Dynamic Range (WDR) function of the models GCA-B0005B and GCA-
B0305B allows getting crystal clear images even in extreme conditions. These Cameras 
are highly sensitive and have a good low-light performance.

These instructions apply to the following products. For the different properties of the 
products please refer to the table.

2. Important Safety Instructions

Be sure to use only the standard adapter that is specified in the specification sheet. 
Using any other adapter could cause fire, electrical shock, or damage to the product. 
Incorrectly connecting the power supply may cause explosion, fire, electric shock, or 
damage to the product. Do not connect multiple products to one single adapter. 
Exceeding the capacity may cause abnormal heat generation or fire.

Do not place conductive objects (e.g. screwdrivers, coins or any metal items) or 
containers filled with water on top of the product. Doing so may cause personal injury 
due to fire, electric shock, or falling objects.

If any unusual smells or smoke comes out of the unit, stop using the product. In this 
case, immediately disconnect the power source and contact the service center. 
Continued use in such a condition may cause fire or electric shock.

If this product fails to operate normally, contact the nearest service center. Never 
disassemble or modify this product in any way. (GRUNDIG is not liable for problems 
caused by unauthorised modifications or attempted repair.)

To prevent fire or electric shock, do not expose the inside of this device to rain or 
moisture.

3. Package Contents

These parts are included: 
Camera, Manual, Power Terminal Block, 230V Power cable (only for GCA-B0005B), 
C/CS Mount Adapter, Back Focus Adjuster

2

English

Содержание GCA-B0005B

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды