Grundig DUO GRP6000, Руководство пользователя, Страница: 19 / 48

Technical information details
The technical information screen displays the hardware and software information
of the receiver. This information may be required by the service agent or service
call operator.
1
Press » «, select » SETUP « and press » OK «.
2
Select » TECHNICAL INFORMATION « and press » OK «.
Electricity consumption
The Receiver/Player will always switch to standby when you press the » « key,
but will still use energy running the clock and other functions of the Receiver/
Player. To minimise this energy drain, if you press and hold the »
« key, the
Receiver/Player will switch off all functions. In this mode the Receiver/Player only
uses a tiny amount of energy, but it will take a little longer to switch on. It will also
interrupt the aerial signal making
analogue
TV viewing or recording
impossible. If you don’t press a key on the handset or the Receiver/Player within
24 hours, then the unit will automatically switch to this low power standby mode.
Notes on simultaneous operation
●
The Receiver/Player will always switch on in
TV mode
. To switch to
Disc
mode press » «, » « or »
!
«
●
The SVHS output will always provide a signal in TV mode , but must be
correctly set-up for
Disc mode
. (See “Selecting the video output socket” in
the
Disc mode
section of the user manual.
●
The aspect ratio (4:3 or 16:9) of the signal is stored for
TV mode
and
Disc
mode
separately so the settings must be adjusted accordingly.
●
The TV program reminder will occur in TV mode or Disc Mode. If you choose
to watch your chosen TV program when in Disc Mode, the Receiver/Player
will automatically switch to TV Mode and Stop Disc playback. If you choose
cancel the Disc playback will resume.
●
When a timer event is set, the 2nd infra red controller is disabled to prevent
interruption.
Optional RF External Infrared Receiver kit
1
Connect the receiver adapter into the aerial socket of your 2nd TV and then
connect the aerial extension lead from the »
RF Out2 « socket on the
Receiver/Player to the adapter.
2
Place the Infrared Receiver on top of the TV or somewhere in view.
3
Follow the steps in the Advanced setup section of this book to configure
the Receiver/Player to work with the 2nd handset.
19
OTHER INFORMATION
TV MODE
9
9