30
Changing remote control levels
If you are operating two digital receivers with the TP 766 S remote
control, you must enter a separate remote control level for each
digital receiver.
Changing to remote control level 2
1
Press »
DR
« and »
Ǽ
« at the same time for about five seconds
until “Alter Remote Control code to level 2?” appears.
Note:
If you do not want to change over to remote control level 2,
press »
Z
« to quit the menu.
2
Press and hold down »
DR
« and press »
OK
« to confirm.
– If you now want to use the digital receiver with the second
remote control level, you must first press and hold down
»
DR
« while pressing the button on the remote control with the
required function.
Returning to remote control level 1
1
Press »
Ǽ
« for about five seconds until “Alter Remote Control
code to level 1?” appears.
Note:
If you do not want to change over to remote control level 1,
press and hold down »
DR
« while pressing »
Z
«.
2
Press »
OK
« to confirm.
– Remote control level 1 has been selected.
SPECIAL SETTINGS
______________________________
