32
Resetting the receiver to its original state
This function enables you to delete the station lists and all custom
settings.
1
In the main menu, select »Box Settings« with »
P-
« or »
P+
« and
press »
OK
« to confirm.
2
Select »Restore Factory Settings« with »
P-
« or »
P+
« and press
»
OK
« to confirm.
3
Press »
Ǹ
« or »
Ƿ
« to select »Yes« and press »
OK
« to confirm.
– The receiver switches itself off and then on again.
– The »Initial installation« menu appears.
4
Reprogram the device as described on page 15.
Updating the digital receiver software
The digital receiver’s technology enables you to update the soft-
ware.
The digital receiver must be in standby to receive software updates.
The receiver checks for software updates every night between
01:00 and 05:00. If there is an update, the receiver will automati-
cally update its software.
You can also search for updates manually.
1
In the main menu, select »Technical Information« with »
P-
« or
»
P+
« and press »
OK
« to confirm.
2
Select »System Information« with »
P-
« or »
P+
« and press
»
OK
« to confirm.
3
Select »Update Software« with »
OK
«
4
Press »
Ǹ
« or »
Ƿ
« to select »Yes« and press »
OK
« to confirm.
– The receiver checks for a more recent update. The actual
update is always carried out in the time period mentioned
above.
Note:
An interruption during the downloading process (for example
by pulling out the mains plug) can damage the operating soft-
ware of the digital receiver.
Read the instructions in the menus carefully.
SPECIAL SETTINGS
______________________________
