Grundig DT 3201, Инструкция по эксплуатации

Страница: 6 / 15

ķ
3
GB
General
Mains connection
With the NT 675 power supply unit.
This power supply unit can be used to operate all Grundig office
equipment. It can be connected to IT mains with a maximum line-
to-line current of 250 V.
Connect the mains cable to the alternating voltage mains
230 V … 240 V (± 10 % ), 50 Hz … 60 Hz.
Plug the Dt 3201 mains connection plug into the ac 9 V ~ socket (at
the back of the unit).
Important information
.
Make sure that the ventilation openings on the housing are not
blocked.
Do not expose the unit to temperatures higher than 35 °C.
Furniture surfaces are coated with various kinds of synthetic mate-
rials or paints that contain chemical substances.
These substances, if they come into contact with the feet of the
unit, can produce a residue on the surface that is either difficult to
remove or permanent.
The accessories mentioned in this manual (the 535 foot switch
and the 541 hand switch etc.) are not included in delivery.