ENGLISH
37
Manual station search
If the station search does not find a particular station automatically,
it can search for it using the manual search. To do this all the para-
meters for the station must be correctly entered. You can find the
latest transponder information on the teletext pages of various broa-
dcasters, in a current satellite TV magazine or on the Internet.
1
Open main menu with »
i
«.
2
Select »Search for Channels« with »
P-
« or »
P+
« and press
»
OK
« to confirm.
3
Select »Manual Search« with »
P-
« or »
P+
« and press »
OK
«
to confirm.
4
Select the required line with »
P-
« or »
P+
«.
– »Satellite«:
Select satellites with »
Ǹ
« or »
Ƿ
«.
– »Transponder«: Select transponder with »
Ǹ
« or »
Ƿ
«.
– »Frequency«:
Enter the frequency of the channel as five
digits using »
1...0
« (only required if the
transponder is not pre-defined).
– »Symbol Rate«: Enter the five-digit symbol rate of the chan-
nel using »
1 ... 0
« (only required if the
transponder is not pre-defined).
– »Polarisation«: Select polarisation of the channel (»Horizon-
tal« or »Vertical«) with »
Ǹ
« or »
Ƿ
« (only
necessary if the transponder is not pre-defi-
ned).
– »Channels to
search for«:
Select »All«, »Scrambled« or »Free to air«
Stations with »
Ǹ
« or »
Ƿ
«.
5
Select the »OK« button with »
P-
« or »
P+
« and press »
OK
« to
start the search.
– The »Scanning« line indicates the progress of the search.
– The search is finished when the message »Scanning comple-
te« appears.
Notes:
If the desired channel is not found, the frequency needs to be
slightly adjusted (± 5 MHz) and the search restarted.
A search will only be successful if the display quality
≥
30 %.
The search can be ended prematurely with »
Z
«.
6
New stations can now be added to the “old” channel list;
or
the “old” channel list can be replaced by the new channel list;
or
SPECIAL SETTINGS _________________
