Grundig Digta CordEx, Руководство по эксплуатации

Страница: 25 / 34

2
d
Renewed registration is only required if dictation micro-
phone has been disconnected from docking station for an
extended time. Otherwise it is sufficient to switch on the
dictation microphone in reception area of docking station
to establish connection.
Permanent registration at a docking station
If several docking station are in close proximity (e.g. in one room),
the dictation microphone may only be connected to one selected
station when switched on.
Switch on dictation microphone [1] near the permanently
assigned docking station [2].
The dictation microphone registers in variable mode at the
docking station.
In system menu, set option
Station allocation to Static pair.
(see section “Settings in system menu”).
The dictation microphone is now permanently linked to the
docking station and connects with it every time it is switched
on.
►
►
d
The setting can only be reversed by means of the perma-
nently assigned dictation microphone.
Installing firmware updates
Firmware updates include important changes by the manufactur-
er to the functions of the Digta CordEx. New firmware is available
on the Internet site at:
www.grundig-gbs.com
An Internet connection is required for downloading.
NOTICE
The device can be damaged if the update process is
interrupted!
Do not interrupt the update process!
If the firmware is incomplete, the device may be rendered
unusable.
d
Prior to an update check if a firmware with a higher ver-
sion number is available.
Switch on dictation microphone [1].
■
►
Extended operation