ENGLISH
11
Searching for stations
The automatic search looks for receivable stations among the
available bouquets of digital stations.
1
Press »
Ǽ
« to switch on the digital receiver.
–
The »Ensimmäinen asennus« (Initial installation) page
appears when the device is first switched on.
2
Press »
OK
« to start initial installation.
3
Select your language using »
Ǹ
« or »
Ƿ
« and press »
OK
« to
confirm.
– The »Settings« menu appears.
4
Select the country with »
Ǹ
« or »
Ƿ
«.
5
Select »Screen Format« by pressing »
P+
« or »
P-
« and then
press »
Ǹ
« or »
Ƿ
« to select the format.
6
Select the »TV Output Format« line with »
P+
« or »
P-
« and
press »
Ǹ
« or »
Ƿ
« to select the video signal.
Note:
The data for »symbol rates« is set by default. Changes are only
necessary for special cable providers.
Make enquiries at your cable provider.
7
Select the »OK« button with »
P+
« or »
P-
« and press »
OK
« to
confirm.
– The »Automatic Search« menu appears.
– You can retain the values for the start and end frequency.
– Select the »All« option in »Channels to search for« if you
would also like to receive encoded stations.
8
Select the »OK« button with »
P+
« or »
P-
« and press »
OK
« to
start the search.
– Display: »Searching«, the progress of the search is shown as
a percentage.
– A message will appear once the search has ended.
9
Press »
OK
« to end initial installation.
– The stations that have been found are stored.
10
Press »
OK
« to go to the first channel position.
BASIC SETTINGS
__________________________________
