Grundig CMS 4200, Руководство пользователя, Страница: 37 / 70

37 ENGLISH
Prepare the Remote Control
The provided Remote Control allows the unit to be
operated from a distance.
•
Even if the Remote Control is operated within
the effective range 19.7 feet (6m), remote
control operation may be impossible if there
are any obstacles between the unit and the
remote control.
• If the Remote Control is operated near other
products which generate infrared rays, or if
other remote control devices using infra-red
rays are used near the unit, it may operate
incorrectly. Conversely, the other products may
operate incorrectly.
Replace the Remote Control Battery
1
Press and slide the back cover to open the
battery compartment of the remote control.
2
Insert two AAA size batteries. Make sure the (+)
and (–)ends of the batteries match the (+) and
(–) ends indicated in the battery compartment.
3 Close the battery compartment cover.
Precautions Concerning Batteries
•
Be sure to insert the batteries with correct
positive “ ” and negative “ ” polarities.
•
Use batteries of the same type. Never use
different types of batteries together.
• Either rechargeable or non-rechargeable
batteries can be used. Refer to the precautions
on their labels.
• Be aware of your fingernails when removing the
battery cover and the battery.
•
Do not drop the remote control.
•
Do not allow anything to impact the remote
control.
• Do not spill water or any liquid on the remote
control.
PREPARATIONS _____________________________
•
Do not place the remote control on a wet
object.
• Do not place the remote control under direct
sunlight or near sources of excessive heat.
• Remove the battery from the remote control
when not in use for a long period of time,
as corrosion or battery leakage may occur
and result in physical injury, and/or property
damage, and/or fire.
•
Do not use any batteries other than those
specified.
•
Do not mix new batteries with old ones.
• Never recharge a battery unless it is confirmed
to be a rechargeable type.