10
Mains operation
Note:
Check that the mains voltage on the type plate (on the bottom of the
device) corresponds to your local mains supply.
If this is not the case, contact your specialist dealer.
1
Plug the mains cable supplied into the »
AC ~
« socket on the device.
2
Plug the mains cable into the socket (230 V~, 50/60 Hz).
Note:
If there are batteries in the device, these are switched off automatically
during mains operation.
Caution:
The mains plug is used to connect the device to the mains supply. In
order to completely disconnect the device from the mains, the mains
plug has to be pulled out from the mains outlet.
Make sure the power plug is freely accessible.
Battery operation
You can also operate the device using standard batteries (not supplied). In
this case, you must disconnect the mains power cable.
1
Open the battery compartment by pressing the marked area and pus-
hing down the cover.
2
Insert four batteries (4x1.5 V, Type IEC, AM2, LR 14, C-size) according
to the polarity marked on the battery compartment.
Note:
Do not expose the batteries to extreme heat, caused for example by
direct sunlight, heaters or fire.
Remove the batteries when they are flat or when you know that the
device will not be used for a long period of time.
No liability is accepted for damage resulting from leaking batteries.
Environmental note:
Batteries, including those which contain no heavy metal, must not be
disposed of with household waste. Please dispose of used batteries in
an environmentally sound manner. Observe the legal regulations which
apply in your area.
POWER SUPPLY
___________________________________
LIFT
AC~
AC~
LIFT
AC~
