ENGLISH
21
Mains operation (with mains adapter)
Note:
Check if the mains voltage on the mains adapter type plate corresponds
to your local mains supply.
The only way to disconnect the device from the mains supply is to
unplug the adapter. Only unplug the mains adapter from the socket
when you are not using the device.
1
Plug the mains adapter cable into the »
DC IN 6V
« socket on the
device.
2
Insert the mains adapter plug in the socket.
Battery operation
1
Unplug the mains adapter from the device and remove the cover of the
battery compartment on the bottom of the device.
2
Insert two batteries, observing the polarity on the bottom of the battery
compartment (Mignon type, e.g. 2x1.5V, LR6, AM3; AA).
Note:
Remove the batteries when they are flat or when you know that the
device will not be used for a long period of time. No liability is accepted
for damage resulting from leaking batteries. The batteries are switched
off during mains operation.
When changing the battery, plug in the adapter and the »
CD RADIO
«
switch to »
CD
«. Otherwise the contents of the memory will be deleted
after 30 seconds.
Using Nickel-Cadmium batteries
When using Nickel-Cadmium batteries (NiCd, size AA 1,2 V/
600 mAh), use the mains adapter supplied as a charger. If the batteries
named are in the battery compartment, the device switches over automati-
cally from network to battery operation.
1
Take off the cover of the battery compartment on the bottom of the
device.
2
Insert two batteries, observing the polarity marked on the bottom of the
battery compartment.
3
Plug the mains adapter into the »
DC IN 6V
« socket on the device and
plug the mains adapter onto the mains socket.
– The »
CHARGE
« indicator lamp lights up.
Note:
When buying NiCd batteries, always make sure that approximately 3
mm of the metal end at the negative pole is visible (see illustration). If
necessary, use a knife to remove the insulation.
Completely charge up the batteries before you first use them or if you
have not used them for a long time.
The charging time is approximately 12-14 hours. Using the device while
the batteries are charging increases the charging time.
POWER SUPPLY
___________________________________
DC IN 6V
+>-
OPEN
OPEN
3 mm
min
