36
Antennas
1
For FM stations (VHF) extend the telescopic antenna »
Antenne
«.
Note:
If the FM signal is too strong, it is advisable to push in the telescopic antenna.
2
The radio has a built-in rod antenna for MW reception. Turn the device around to align
the antenna.
Selecting the radio input source
1
Press »
SOURCE
« to select the input source.
Setting and storing radio stations
Automatic station search
1
Press »
BAND
7
« to select the frequency band (FM or MW).
2
Activate the station search by pressing »
8
« or »
9
« until the frequency display changes
to rapid run-through.
– The search stops when a station is found.
Manual station search
1
Press »
8
« or »
9
« briefly several times to move the frequency up in steps.
– The frequency changes in 50 kHz steps (FM) and 9 kHz steps (MW).
Storing stations as presets
You can store up to 20 stations in the FM band and up to 10 stations in the MW band.
1
Press »
BAND
7
« to select the frequency band (FM or MW).
2
Press »
8
« or »
9
« to select the station.
3
Press »
PROG.
« briefly to activate the memory function.
4
Select the preset with »
A
« or »
S
«.
5
Press »
PROG.
« to save the station.
6
To store more stations, repeat steps
2
to
5
.
Note:
You can replace a station on a preset with a new one by carrying out steps
2
to
5
as
described above.
RADIO MODE
_________________________________________________
