Antennas
1
For FM stations (VHF) extend the telescopic antenna »
Antenne
«.
Note:
If the FM signal is too strong, it is advisable to push in the telescopic antenna.
2
The radio has a built-in rod antenna for MW reception. Turn the device around to direct
the antenna.
Selecting the radio input source
1
Press »
SOURCE
« to select Tuner as the input source.
Setting and storing radio stations
Automatic station search
1
Press »
7
BAND
« to select the frequency band (FM or MW).
2
Activate the station search by pressing »
8
« or »
9
« until the frequency display changes
to rapid run-through.
– The search stops when a station is found.
Manual station search
1
To move the frequency up in steps, briefly press »
8
« or »
9
« several times.
– The frequency changes in 50 kHz steps (FM) and 9 kHz steps (MW).
Storing stations on station positions
Up to 10 stations in the FM band and up to 10 stations in the MW band can be stored.
1
Press »
7
BAND
« to select the frequency band (FM or MW).
2
Press »
8
« or »
9
« to select the station.
3
Press »
PROG.
« briefly to activate the memory function.
4
Press »
P +
« or »
P –
« on the remote control, or »
A
« or »
S
« on the device to select the
preset station.
5
Press »
PROG.
« to save the station.
6
To store more stations, repeat steps
2
to
5
.
Note:
You can replace a station on a preset with a new one by carrying out steps
2
to
5
as
described above.
RADIO MODE
_________________________________________________
ENGLISH
35
