Grundig 65 VLX 6950 BP, Руководство пользователя

Страница: 56 / 77

ENGLISH 56­
NETWORK­SETUP
­-------------------------------------------------------------------------------------------
You can launch various applications on the
Application Portal. These applications include
various types such as video, picture, music,
game, social networking applications, news
and sports applications, weather forecast
applications.
Network­connection
You can establish a wired or wireless connection
between your television and the local network.
If you want to use a wired network connection,
please start with the instructions here:
If you use a wireless network connection, please
follow the instructions in the "Wireless network
connection" section on page 58.
Note:
7
The following section describes connecting
to the home network if you did not carry this
out during the “initial set-up”.
Wired­network
Wired­network­connection
1­ Connect the output of external modem to
LAN socket with Cat 5 cable.
Note:
7
Connection cables are not supplied.
Wired­network­settings
There are two ways of making the wired
network settings.
A Automatic connection,
all data regarding connection settings
(»IP Address«, »Netmask«, »Gateway«
and »DNS«) are obtained from modem
automatically.
B Manual connection,
all data regarding connection settings (»IP
Address«, »Netmask«, »Gateway« and
»DNS«) must be configured manually.
Automatic­connection
Most of the home networks are Dynamic. If
you have a dynamic network, you must use a
DSL modem that supports DHCP. Modems and
IP sharers that support DHCP obtain the »IP
Address«, »Netmask«, »Gateway« and »DNS«
values required for internet access automatically,
and thus you are not required to enter those
values manually.
1­ Open the menu with » MENU «.
2­
Press »
V
« or »
Λ
« to select »Network« and
press »
>
« to confirm.
3­ Press »
V
« or »
Λ
« to select »Wired
Network« and press » OK « to confirm.
4­ To approve the Privacy Policy, press »
<
« or
»
>
« to select »Accept« and press » OK « to
confirm.
5­
According to your network infrastructure,
press »
V
« or »
Λ
« to select »IPv4« or
»IPv6« and press »
OK
« to confirm.
Note:
7
To access the internet through IPv6, your
internet service provider and modem must
support IPv6. If only the modem supports
IPv6, it can only connect to the modem; you
cannot connect to internet.
6­ Press »
V
« or »
Λ
« to select »Auto Input«
and press » OK « to confirm.
– »Connecting ... « message will be
displayed and if the connection is
successful, »Connect Success« message
will be displayed.