Chassis SX
GR
UNDIG Ser
vice
1 - 24
ENGLISH
30
CONNECTED TV AND HOME NETWORK
------------------------------
5
Enter the »Subnet Mask«:
Select the first input position by pressing »
Λ
«
and press »
O
« to activate.
Select the first number by pressing »
V
« or
»
Λ
«.
Select the next digit position by pressing »
>
«
and press »
O
« to activate.
Repeat the procedure for all characters.
Select the push button »Next« with »
V
« or
»
Λ
« and press »
O
« to confirm.
6
Enter the »Gateway«:
Select the first input position by pressing »
Λ
«
and press »
O
« to activate.
Select the first number by pressing »
V
« or
»
Λ
«.
Select the next digit position by pressing »
>
«
and press »
O
« to activate.
Repeat the procedure for all characters.
Select the push button »Next« with »
V
« or
»
Λ
« and press »
O
« to confirm.
7
Enter the »DNS« (Domain Name System):
Select the first input position by pressing »
Λ
«
and press »
O
« to activate.
Select the first number by pressing »
V
« or
»
Λ
«.
Select the next digit position by pressing »
>
«
and press »
O
« to activate.
Repeat the procedure for all characters.
8
Select the push button »OK« with »
V
« or
»
Λ
« and press »
O
« to confirm.
– »Attempting to connect to the wired net-
work« message is displayed, the network
connection is made and the result of the
download test is displayed.
9
After your device is connected to the net-
work, the download bit rate is tested auto-
matically.
Confirm this message by pressing »
O
«.
10
Press »
Z
« to end the setting.
Note:
7
Connection info such as »MAC Address«,
»IP Address«, »Netmask« and »DNS« can
be see in the »Settings« menu.
11
Press »
Z
« again to switch to the
»CONNECTED TV« main menu.
Wireless network
Wireless network connection
1
Connect the GRUNDIG WiFi USB Dongle to
the »
USB-VOD-WiFi
« socket.
Notes:
7
The GRUNDIG WiFi USB Dongle supports
IEEE 802.11 B/G and N communication
protocols. We recommend you to use IEEE
802.11N protocol to obtain the best perfor-
mance in HD video playback.
7
If you use a modem that supports IEEE 802.
11B/G, video playback performance may
be poor when compared to a modem that
supports IEEE 802.11N since the data
transfer rate of IEEE 802.11B/G protocol
is lower.
7
The GRUNDIG WiFi USB Dongle must di-
rectly be connected to »
USB-VOD-WiFi
«
socket; USB Hub is not supported.
7
Please note that video playback perfor-
mance in a DLNA application on a wireless
local network and in a Connected TV ap-
plication on a network with internet connec-
tion depends on the number of users on the
network as it is the case in every wireless
network.
Chassis SX
GR
UNDIG Ser
vice
1 - 24
31
ENGLISH
7
It is recommended to switch off the equip-
ment that are not in use in home network in
order to avoid unnecessary network traffic.
7
Placing the modem or wireless network shar-
er on an elevated location will increase the
wireless connection reception strength.
7
Wireless connection reception strength may
vary depending on the type of the modem,
the distance between the modem and televi-
sion and the distance between the device
used as a DMS for DLNA application and
the modem.
7
Modem must be transmitting its SSID in order
to establish a wireless connection. Television
can not connect to a network without SSID.
7
When a network connection is established
with the wireless USB network, the con-
nection may be weak depending on the
strength of the wireless network in the area.
Extending the wireless USB device to a po-
sition that can see the modem with a USB
extension cable will increase the wireless
network performance.
Initial setup
1
Switch on the television set from standby with
»
8
«, »
1…0
« or »
P+
« or »
P-
«.
2
Open the menu with »
i
«.
3
Select the menu item »CONNECTED TV«
with »
V
« or »
Λ
« and press »
O
« to confirm.
– The line »Open Connected TV« appears.
4
Confirm the option »Open Connected TV«
with »
O
«.
– The »Language« menu appears.
5
Select the menu language with »
V
« or »
Λ
«
and press »
O
« to confirm.
– The »Country« menu appears.
6
Select the country with »
V
« or »
Λ
« and
press »
O
« to confirm.
– The Info menu appears.
7
Confirm the initial network setup configura-
tion with »
O
«.
– The »Settings« menu appears.
CONNECTED TV AND HOME NETWORK
------------------------------
Wireless network settings
Most of the home networks are Dynamic. If you
have a dynamic network, you must use a DSL
modem that supports DHCP. A Television con-
nected to the same network with a Modem or
IP sharer that support DHCP obtains the »DNS«
values that are required for »IP Address«, »Net-
mask«, »Gateway« and internet access auto-
matically, and thus you are not required to enter
those values manually.
1
Select the line »Network« with »
V
« or »
Λ
«
and press »
O
« to confirm.
– The »Settings > Network« menu appears.
6HWWLQJV!1HWZRUN
$FFHVV3RLQW
:LUHOHVV
&RQQHFWLRQWHVW
:LUHG
JXHVW6HFXUHG:3$
JXHVW2Q
2
Select the line »Wireless« with »
V
« or »
Λ
«
and press »
O
« to confirm.
–
The message »Scanning...« is displayed
and the wireless networks that are found
appears.
3
Select the network you want to connect with
»
V
« or »
Λ
« and press »
O
« to confirm.
– Wireless connection password menu is dis-
played.
4
Select the first required character with »
V
«,
»
Λ
«, »
<
« and »
>
« and press »
O
« to confirm.
Repeat the procedure for all characters.
Notes:
7
Select the push button »
A,a
« for upper
case/lower case and press »
O
« to confirm.
7
For canceling a character, select the push
button »
I
« and press »
O
« to confirm.
5
For entering the password, select the push
button »OK« with »
V
«, »
Λ
«, »
<
« and »
>
«
and press »
O
« to confirm.
Chassis SX
GR
UNDIG Ser
vice
1 - 24
Chassis SX
GR
UNDIG Ser
vice
1 - 24
Chassis SX
GR
UNDIG Ser
vice
1 - 24
Chassis SX
GR
UNDIG Ser
vice
1 - 24
Chassis TX
GR
UNDIG Ser
vice
1 - 24
