ENGLISH
32
wirednetworksettings
There are two ways of making the wired network
settings.
A
Automatic wired network connection,
all connection settings (»IP Address«, »Net-
mask«, »Gateway« and »DNS«) are ob-
tained from modem automatically.
B
Manual wired network connection,
all connection settings (»IP Address«, »Net-
mask«, »Gateway« and »DNS«) must be
configured manually.
Automaticwirednetwork
connection
Most of the home networks are Dynamic. If you
have a dynamic network, you must use a DSL
modem that supports DHCP. A Television con-
nected to the same network with a Modem or
IP sharer that support DHCP obtains the »DNS«
values that are required for »IP Address«, »Net-
mask«, »Gateway« and internet access auto-
matically, and thus you are not required to enter
those values manually.
1
Open the menu with »
mENu
«.
2
Select the line »CONNECTED APPS« with
»
v
« or »
Λ
« and press »
oK
« to confirm.
– The »CONNECTED APPS« menu appears.
inter@ctive Applications
Connection Type
Wired
DNS
Netmask
Gateway
MAC Address
10.134.150.8
255.255.255.0
10.134.151.254
E1:DF:BF:92:00:11
IP Address
10.134.151.15
Exit
Back
CONNECTED APPS
Network Settings
dd.mm.yyyy
hh:mm
Connect
Test Connection
OK
Network Configuration
AUTO
3
Select »Connection Type« with »
v
« or »
Λ
«
and then select »Wired« with »
<
« or »
>
«.
4
Select »Network Configuration« with »
v
« or
»
Λ
« and then select »AUTO« with »
<
« or »
>
«.
5
Start the registration to the home network by
pressing »
« (red).
– The mesage »Connecting ... Please Wait«
appears.
6
Press »
« (green) to make sure that the
network connection is established with the
current settings.
– The messages »Testing ... Please Wait«
appears, after successfull announcement
the messages »Connecting To Gateway:
Success« and »Internet Connection:
Success«.
7
Press »
mENu
« to end the setting.
Note:
7
If you do not have a dynamic network,
follow the instructions in manual connection
section.
SmArtINtEr@CtIvEtvANDHomENEtworK
