Grundig 26 VLC 4010 C, Руководство пользователя, Страница: 29 / 33

ENGLISH
30­
INFORMATION
­------------------------------------------------------------------------------------------------------------------
Displaying­signal­information
(only for digital television channels)
1 Open the menu with » M «.
– The »PICTURE« menu appears.
2 Select the menu »CHANNEL SETUP« with »
r
«
or »
e
«.
3 Select »Signal Information« with »
q
« or »
w
«
and press »
OK
« to confirm.
– You will see information on the channel,
modulation, quality and signal strength.
Notes:
7
The lower section of the menu shows the
signal properties. The further the bar for
»quality« and »Signal Strength« extends to
the right, the better the reception signal.
7
The signal level not only depends on your
receiver system, but also on the channel
which is currently active. Remember this
when aligning your antenna using the signal
level display.
4
Press »
M
« to end the display.
Updating­software
(only for digital television channels)
1 Open the menu with » M «.
– The »PICTURE« menu appears.
2 Select the »OPTIONS« menu with »
r
« or
»
e
«.
3 Select the »Software Update« menu by
pressing »
q
« or »
w
«.
4 Press » OK « to start the software update.
– The software is updated automatically, if
possible.
5
Press »
M
« to end the setting.