Grundig 19 VLC 2001 C, Руководство пользователя

Страница: 9 / 45

ENGLISH
10­
SETTINGS
­---------------------------------------------------------------------------------------------------------------------------------------
Searching­for­television­stations
The television has an automatic tuning function,
which first searches for digital TV channels and
then analogue ones.
You start the search and can then sort the televi-
sion stations into your order of preference.
There are 550 presets for digital channels and
99 for analogue channels, to which you can
assign TV stations from the antenna or from the
cable connection (analogue channels).
1 Press » POWER «, » 1…0 « or » P+ « or » P– «
to switch on the television from standby mode.
– The »Installation Guide« menu appears
when the device is first switched on.
Installation Guide
Language Settings English
Active Antenna Power Off
Select Exit
Auto Tuning
s
2­ Press »
r
« or »
e
« to select the language.
Help:­
7
If the »Installation Guide« menu does not ap-
pear on the screen, make the setting by fol-
lowing the instructions on returning the tele-
vision to its factory condition on page 25.
Note
7
The antenna power supply may only be
switched on if the antenna is actually an ac-
tive indoor antenna with a signal amplifier
and it is not already supplied with a voltage
via a mains plug (or similar supply).
7
Otherwise you may cause a short circuit and
irreparably damage your antenna.
3 Select the »Active Antenna Power« with »
q
«
or »
w
«.
Press »
r
« or »
e
« to switch on the antenna
voltage »On« (Only DVBT Channels).
4 Select »Auto Tuning« with »
q
« or »
w
« and
confirm with » OK «.
– »Country Selection« is active.
5 Press »
r
« or »
e
« to select the country.
6
Select the »Scan Type« with »
q
« or »
w
«.
Press »
r
« or »
e
« to select whether you want
to search for only digital television stations
(DTV), only analogue television stations (ATV)
or both (ATV & DTV).
7 Select »Time zone« with »
q
« or »
w
«.
Press »
r
« or »
e
« to select time zone.
8
Select »TV Connection Type« with »
q
« or »
w
«.
Press »
r
« or »
e
« to set the required connec--
tion type:
– »Antenna« to search for terrestrial TV chan-
nels (DVB-T);
Help:­
7
If you select »Cable« the screen for selecting
the scan type appears. See Tuning all digi-
tal television stations with cable connection
on page 37.
9
Press »
OK
« to start the search for terrestrial
TV channels.
– The »Searching...« menu appears, and the
search for TV stations begins. This may take
several minutes depending on the number
of television stations received.
– The search is ended when the »Programme
Table« appears.
Note:
7
The search can be ended prematurely with
» M «.