Grundfos LiqTec, Инструкция по установке и эксплуатации

Страница: 9 / 156

English (GB)
9
6. Servicing the product
The product cannot be repaired. It must be replaced
with a new one. Contact Grundfos.
7. Technical data
Fig. 3 Dimensions for LiqTec
Supply voltage
230 VAC, 50/60 Hz.
Information related to IEC 61010-1
• Software class A.
• Pollution degree 2.
• Type 1.
LiqTec has been cURus approved according to
UL 508.
Alarm/Run relay output
Potential-free changeover contact.
Maximum contact load:
250 V, 1 A, AC (inductive load).
Terminals
All terminals are suitable for conductors of 0.5 to
2.5 mm
2
or AWG 20-13.
Cables
All cables must be rated minimum 70 °C.
Supply fuse
Maximum 8 A.
8. Disposing of the product
This product or parts of it must be disposed of in an
environmentally sound way:
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest
Grundfos company or service workshop.
The crossed-out wheelie bin symbol on
a product means that it must be
disposed of separately from household
waste. When a product marked with this
symbol reaches its end of life, take it to a
collection point designated by the local
waste disposal authorities. The separate collection
and recycling of such products will help protect the
environment and human health.
See also end-of-life information at
www.grundfos.com/product-recycling.
TM
07
41
9
4
14
19
LiqTec
Maximum ambient temperature: +55 °C.
Power consumption:
9 VA.
Enclosure class: IP20.
Sensor
Maximum pressure: 40 bar.
Maximum liquid temperature: +130 °C.
Maximum cable length: 20 metres.
Standard cable: 5 metres.
Extension cable: 15 metres.
Product number: 96443676.
66.5
90
116