manualshive.com logo in svg

Grundfos DMH 25X, Инструкция по установке и эксплуатации

Поделиться
Скачать
Grundfos DMH 25X Скачать руководство пользователя страница 13

4. Transport and storage

Caution

Do not throw or drop the pump.
Do not use the protective packaging as transport packag-
ing.

4.1 Delivery

The DMH 25X dosing pumps are supplied in different packaging,
depending on pump type and the overall delivery. For transport and
intermediate storage, use the correct packaging to protect the pump
against damage.

4.2 Unpacking

Retain the packaging for future storage or return, or dispose of the
packaging in accordance with local regulations.

4.3 Intermediate storage

See section Ambient and operating conditions.

Related information

3.8 Ambient and operating conditions

4.4 Return

The pump must be thoroughly cleaned before it is returned or
stored. It is essential that there are no traces of toxic or hazardous
media remaining on the pump. Drain the oil from the drive
mechanism and package the pump correctly.

Caution

Grundfos accepts no liability for damage caused by incor-
rect transportation, missing or unsuitable packaging of the
pump, residual media or leaking oil!

Before returning the pump to Grundfos Water Treatment for service,
the 

safety declaration

 at the end of these instructions must be

filled in by authorised personnel and attached to the pump in a
visible position.

Caution

If a pump has been used for a medium which is injurious
to health or toxic, the pump will be classified as contami-
nated.

If Grundfos Water Treatment is requested to service the pump, it
must be ensured that the pump is free from substances that can be
injurious to health or toxic. If the pump has been used for such
substances, the pump must be cleaned before it is returned.
If proper cleaning is not possible, all relevant information about the
chemical must be provided.
If the above is not fulfilled, Grundfos Water Treatment can refuse to
accept the pump for service. Possible costs of returning the pump
are paid by the customer.
The safety declaration can be found at the end of these instructions.

Caution

The replacement of the power supply cable must be car-
ried out by an authorised Grundfos service workshop.

13

English (GB)

Содержание DMH 25X



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды