Grundfos CIM 060, Инструкция по установке и эксплуатации

Страница: 6 / 40

En
gl
is
h (
G
B)
6
4. Installation 4.1 Fitting the CIM 060 into a CIU 902 box
• Click the CIM 060 on the top right corner of the
CIU box. See fig.
2
Fig. 2 Position of the CIM 060 in a CIU 902
If the product is to be connected to a GSM network,
connect the CIU 902 to a CIU 250 unit via GENIbus.
See fig.
3 .
Fig. 3 CIM 060 in a CIU 902 connected to a
GSM network
Warning
The module must only be connected to
SELV or SELV-E circuits.
Warning
Switch off the power supply to the CIU 902
or CU 362 before fitting the CIM module.
Warning
Avoid electrostatic discharge (ESD) when
fitting the CIM module, for instance by
using an ESD protection kit, product
number 96884939.
Note
The CIM module must be installed by
authorised staff.
Note
When installed in a metal cabinet, it might
be necessary to fit an external antenna on
the module.
TM
06
24
82
43
14
TM
0
6
2
471
4
214
Caution Do not fit the CIM 250 in the CIU 902.
CIM
060
CIU 902
CIU 902 CIU 250
GENIbus
CIM
060
CIM
250