Grunbeck thermaliQ:HB2, Руководство по эксплуатации

Страница: 24 / 32

Cleaning, inspection, maintenance
24 | 32
BA_
TD
3-
G
H
000en
_015_A
uf
ber
ei
tu
ngs
gr
uppe
.doc
x
To conduct an inspection, proceed as follows:
1. Visually check for leaks.
2. Check the function of the conductivity measuring cell
(refer to chapter 6.1).
7.3 Maintenance
In order to carry out maintenance, proceed as follows:
1. Visually check for leaks.
2. Check the function of the conductivity measuring cell
(refer to chapter 6.1).
3. Check the connected full demineralisation unit and
replace it, if necessary.