Gruetzner Lubricus LUB-D Series, Руководство пользователя

Страница: 50 / 55

50

10.2 Tube lengths
Generally it is recommended to install LUB-D as close as possible to the consumer
(lubrication point). Ideally, this should be done directly at or on the lubrication point. In
cases where this is not possible due to the installation space or for reasons of reacha-
bility or accessibility, tubes can also be used between LUB-D and the lubrication point
(or distributor).
The tube length shall not exceed 5 meters, the inner tube diameter shall not be lower
than 4 mm. The maximum tube length depends on a wide range of parameters such as
temperature, application and viscosity of the lubricant used.
10.1 Lubricants
Only use lubricants approved by Gruetzner GmbH in the original cartridges developed
and manufactured exclusively for LUB-D.
NOTICE
The lubricant used in each case differs according to the appli -
cation. The respective designation can be found on the label of
the cartridge.
Further information on lubricants, documentation and safety data sheets can be obtained
directly from Gruetzner GmbH.