1
Revision date: 01.28.20
READ THIS DOCUMENT BEFORE YOU BEGIN
Thank you for purchasing this GrowSpan™ door kit.
When properly assembled and maintained, this product
will provide years of reliable service. These instructions
include helpful hints and important information needed to
safely assemble and properly maintain the door. Please
read these instructions
before
you begin.
SAFETY PRECAUTIONS
• Wear eye protection.
• Wear head protection.
• Use a portable GFCI (Ground Fault Circuit Interrupter)
when working with power tools and cords.
WARNING:
Individuals assembling this door are
responsible for designing and furnishing all temporary
bracing, shoring, and supports during assembly.
For safety reasons, those who are not familiar with
recognized construction methods and techniques
must seek the help of a qualified contractor.
115021 Twin-Wall Double Swinging Door Kit
©2020 GrowSpan™
All Rights Reserved. Reproduction
is prohibited without permission.
REQUIRED TOOLS
This list identifies the main tools needed.
Additional tools
and supports may be required depending on structure,
location, and application.
• Tape measure or measuring device
• Fine point marker to mark frame members
• Variable speed drill and impact driver (cordless with
extra batteries works best)
• Tool to cut polycarbonate panel
• Hammers, gloves, and eye protection
• Ladders, work platforms, and other machinery for
lifting designed to work safely at door and door frame
height.
ATTENTION:
Consult the services of a qualified,
professional contractor if you are not familiar with
construction of similar frame structures and components.
UNPACK AND IDENTIFY PARTS
Complete these steps to ensure that you have all
necessary parts.
1. Unpack shipment and place where you can easily
inventory parts. Refer to the Bill of Materials/Spec
Sheets.
2. Verify that all parts listed on Bill of Materials/Spec
Sheets are present. If anything is missing or you
have questions, consult the parts guide and all
diagrams for clarification, or contact customer
service.
NOTE:
At this time, do not open the plastic bags
containing smaller parts such as fasteners and
clamps (if equipped).
PARTS IDENTIFICATION
The following graphics and photos will help identify the
different hardware for the door kit. (Some parts are not
shown.)
102921B & FA4484B
Tek Screws and neo-
bonded washers
104213
Aluminum
U-Channel Profile
104548
End Cap
