Grove Crane GMK6350, Руководство по эксплуатации продукта, Страница: 2 / 24

2
G
M
K
6
3
5
0
features
Grove GMK cranes
incorporate a truly
independent suspension
system known as
MEGATRAK™ which
allows all wheels to remain
on the ground at all times
so that stresses and
weights are not continually
transferred between axles.
Controlled from the cab,
the suspension can be
raised or lowered (front-to-
back and side-to-side) or
automatically levelled for
highway travel.
While the operator is concentrating on the
lift, ECOS (Electronic Crane Operating
System) is busy monitoring and controlling
all of the principle crane functions and
providing exact telescoping status on its
fully graphic in cab display.
Monitoring the lifting condition of the crane at all times, EKS4 works
together with, but independently of the ECOS as a complete command
and control system, or separately as a load moment indicator.
Continually running fault analysis, the system advises service codes
which can be transmitted to any Grove service center, allowing fast
accurate investigation and recommendation.
The proven “U” shaped MEGAFORM™
boom design provides a natural cradling
position for boom sections which
eliminates stiffeners-thus reducing
weight and increasing capacity. Large
wear pads provide superior boom
alignment when telescoping and allows
an excellent transition of weights
between sections. The unique TWIN-LOCK™ boom
pinning system automatically pins the
sections in position using two
horizontal large diameter pins, which
increases security. A single telescope
cylinder inside the boom reduces
weight which has been used
elsewhere to strengthen the machine.