6
WEED BURNER SET WITH REGULATOR AND
HOSE
Special safety instructions
Avoid modifying or repairing the weed
burner yourself, as this may involve serious
safety risks.
Only use original accessories or accessories
recommended by the retailer.
Do not use the weed burner if it is damaged,
defective or worn.
Use soapy water to check that all
connections are sealed before use. Never use
a naked � ame to perform a leakage test.
Use an approved 5, 11 or 33 kg gas bottle.
The gas bottle may only be connected and
replaced in the open air. Do not smoke,
use a naked � ame or electrical equipment
while the gas bottle is being connected or
replaced.
The gas bottle must stand stable so that it
cannot tip over while the weed burner is in
use.
The gas bottle must be upright with the
regulator facing upwards when in use.
Make sure the hose does not break or twist
when using the weed burner.
Keep the gas bottle at a safe distance from
heat sources during use. Make sure that
the gas bottle and hose do not come into
contact with the surfaces you are working
on.
Do not leave the weed burner unattended.
The burner and the area around it will get
very hot during use. Avoid touching these
parts and allow them to cool fully before
transporting or storing the weed burner.
Avoid inhaling smoke or fumes created as a
result of work.
The weed burner and gas bottle should be
stored out of the reach of children in a dry,
dust-free and well-ventilated location.
Note: The weed burner is intended for private
use only.
Model
93608
Type of gas
Propane
Supply pressure
(bar)
2,5
Nominal heat input
(kW)(Hs)
48
Gas consumption
(g/h)
3427,9
Injector size (mm)
1
Ignition device
Piezo ignition
Suitable gas
containers:
Should be used
with a propane gas
cylinder of sizes: 5
kg, 11 kg or 33 kg
Read the manual before use.
For outdoor use only.
The weed burner and gas
bottle should be stored out of
the reach of children in a dry,
dust-free and well-ventilated
location.
The burner and the area
around it will get very hot
during use. Avoid touching
these parts and allow them to
cool fully before transporting
or storing the weed burner.
