10
Torque Specifications
All bolts should be tightened to the specifications that are stated. If specifications are not stated, follow torque
charts below.
Torque - Dry (ft–lbs)
SAE Grade 5
SAE Grade 8
Size
UNC
UNF
UNC
UNF
5/16
17
19
24
27
3/8
30
35
45
50
7/16
50
55
70
80
1/2
75
85
110
120
9/16
110
120
150
170
5/8
150
170
210
240
3/4
260
300
380
420
7/8
430
470
600
670
1
640
720
910
1020
Torque - Dry (ft-lbs)
Size
Grade 10.9
M18 x 2.50
284
M20 x 2.50
401
M22 x 2.50
547
M24 x 3.00
694
Skid Shoe and Tilt Plate Adjustment
Skid Shoe Adjustment:
1. Raise and secure blade to access skid shoe bolts and
nuts.
2. Loosen nuts and set skid shoe depth by sliding the
shoe back and forth in direction ‘A’ shown in Figure 1.
3. Once the depth is set, tighten bolts to 150 ft-lbs.
4. When skid shoes are worn down, replace with new
skid shoes.
Tilt Plate Adjustment:
1. Remove bolts and tilt plates.
Note: Don’t remove all of the bolts at the same time.
2. Add or remove washers as needed to adjust tilt-
way clearance to have 1/16” - 1/8” of clearance in
direction ‘B’ shown in Figure 1.
3. Once the tilt-way clearance is set, tighten bolts to 640
ft-lbs.
Figure 1
Figure 2
Washers
Tilt Plate
Adjustment
Track
Skid Shoe
Skid Shoe
Tilt Plate
A
B
Date:
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
GROUSER PRODUCTS INC ANY REPRODUCTION IN PART OR WHOLE WITHOUT
THE WRITTEN PERMISSION OF GROUSER PRODUCTS INC IS PROHIBITED.
XXXX
GROUSER PRODUCTS INC.
TITLE:
WWW.GROUSER.COM
755 2nd Ave NW Phone 701.282.7710
West Fargo, ND 58078 Fax 701.282.8131
XXXXXXXX
Date:
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
GROUSER PRODUCTS INC ANY REPRODUCTION IN PART OR WHOLE WITHOUT
THE WRITTEN PERMISSION OF GROUSER PRODUCTS INC IS PROHIBITED.
XXXX
GROUSER PRODUCTS INC.
TITLE:
WWW.GROUSER.COM
755 2nd Ave NW Phone 701.282.7710
West Fargo, ND 58078 Fax 701.282.8131
XXXXXXXX
