Groundsman TMC46, Руководство оператора, Страница: 14 / 24

NOTE
See Blades and Accessories on page 17 & 18.
BEFORE COMMENCING TO CHANGE THE
CUTTER BLADE SWITCH THE ENGINE OFF.
Remove and fitting the cutter blade
Tilt the machine forward to rest the chassis nose on the
ground.
The Sod Cutting Blade is attached by three
bolts, two long bolts ‘A’ and one short bolt ’B’. Using
the tee wrench supplied with the machine, loosen the
blade mounting nuts and allow the bolts to slip forward
into the mounting pad to enable the blade to slide
downwards for removal. The two longer bolts are lo-
cated in the lower two holes and the shorter bolt at the
top. Ensure that the heavy washers are re-fitted and
that the nuts are tightened firmly. DO NOT ALLOW
the blade mounting bolts to work loose, re-check that
the nuts are tight periodically when in use.
B
A
Fitting the de-compactor or mole-drain blade
The Mole-drain and de-compactor blades are fitted in
the same manner and with the same precautions as with
the sod cutting blade described above.
PLEASE NOTE that the two longer bolts ’A’ are not
used, all three bolts are the shorter ones for these types
of blades.
Page 13
Changing the Blades