GROUND ZERO
7
Before turn on :
Turn the unit volume to minimum. Adjust the input gains to minimum. Turn
the source unit volume to minimum. Set EQ controls to flat (12 o’clock).
System turn on :
After completing all wiring and signal connections you can now turn
the system on.
Adjust :
Raise volume of the unit to maximum. Adjust left and right input gains of the
unit until half way between minimum and maximum. Gradually increase source
volume until clip. Begin gradually increasing input gains until distortion is
audible, then reduce slightly, system should be extremely load at this point.
Turn the volume control down to minimum and back up to comfortable level.
Volume changes should sound linear and balanced.
Vorsichtsmaßnahmen / Precautions
Aus Sicherheitsgründen muss das Gerät fest im Fahrzeug installiert werden.
Bohren Sie keine Löcher in die Teile des Fahrzeuges, wenn Sie nicht wissen
was sich darunter befindet. Achten sie auf Kabelbäume und
Kraftstoffleitungen.
Benutzen Sie das Gerät immer nur im Rahmen der StVo vermeiden Sie
Ruhestörungen .
Enjoy your system, but use it wisely and safely!
Never drive with the volume raised so high you cannot hear what is occurring
in traffic around you.
Be aware that repeated exposure to excessive volume levels can permanently
damage your hearing.
Keep all electronics away from moisture, dust, extreme heat or vibrations.
