12
GROUND ZERO
3. A2DP (Advance Audio Distribution Profile)
A2DP is a function which can receive the audio frequency signal from mobile phone, amplify by car audio
and play out by speaker.
Operation:
First time to Enter Bluetooth music playing program via connect mobile phone (no need to connect if the
unit already connected with phone) via play music, the LCD will display A2DP, press MODE button to
switch to other modes.
Note!
We cannot guarantee an unobjectionable function of the A2DP music player with all types of mobile
phones. Malfunctions caused by connecting incompatible devices cannot be excluded.
4. AVRCP
When the music is playing, Press PRESET 1 / PAUSE button once to pause, press again to play. Press
“track up” button to the next song, press “track down” button to the previous song.
5. BT MENU
Long press the mode
b
utton to enter Blooetooth Menu, and rotate the VOL knob, the BT MENU
changed in the following sequence:
L-DIAL (Last Number Redial) =>VOICE (VOICE DIALING) => CALL LIST (Displayed only if the received
calls are recorded in memory), short press mode
button again to enter your selected menu, or long
press it to resume to former mode. See below for further menu descriptions.
L-DIAL: After selecting this menu (LCD shows “L-DIAL”), short press mode
button again to enter it
(LCD shows “REDIAL”), then short press once again to redial the last number.
VOICE DIALING
In any mode and when a mobile phone is connected with Bluetooth to the unit, long press (over 2
seconds) the mode
button into the Bluetooth menu, then rotate the volume knob to change the bt
voice, then press the mode
button to start Voice Dialing. Speak out the voice tag into the microphone.
Your mobile phone will dial the number corresponding to the voice tag. Short press the mode
button
to cancel the command.
Note!
This function has to be supported by your mobile phone. See your owner’s manual of your mobile phone
for more information on voice dialing.
CALL LIST
After selecting CALL LIST (LCD shows CALL LIST), short press mode
button to enter this menu, LCD
will show the incoming calls history, rotate volume knob to display the number one by one. Press mode
button to dial the number.
ANSWER CALL
In any mode, when Bluetooth connected, if incoming a call, short press mode
button to answer the
call.
REJECT CALL
In any mode, when Bluetooth connected, if incoming a call, long press mode
button to reject the call.
HANG UP CALL
In any mode, when Bluetooth connected, short press mode
button during a call to hang up the call.
CALL TRANSFER
In any mode, when Bluetooth connected, long press mode
button during a call to transfer the call
voice to mobile phone (the device will come to the former mode), and long press it again to resume.
13
GROUND ZERO
6. PARTIES CALL
1)
While in call and 2nd call comes in, short press BAND button to accept call.
Press mode
key to switch from caller B to Caller A.
2)
While in call and 2nd call comes in, long press BAND button to reject call.
CD / USB/ SD Card Operations
Loading/Ejecting a disc
Turn the power on. And insert the disc to disc slot with the printed side facing up. Press EJECT button to
eject the disc. Inserting the SD card/USB device Insert the SD card or USB device into SD slot or USB
socket. Then the playing mode will be changed into SD or USB mode automatically.
Note!
When SD card and USB device are both inserted, the playing mode will be changed into the mode of the
device inserted later.
Playing/pausing
The unit will automatically play from the first sound track recorded on a disc/SD /USB device. To ensure
good system performance, wait until the unit finishes reading the disc /device information before
proceeding. Press 1/PAUSE button on remote control to pause playback, press it again to resume
playback.
Playing the previous/next track
During playback press PREVIOUS button to play the previous track. Press NEXT button to play the next
track.
Scanning forward and backward
Press and hold Fast forward/backward buttons to select fast forward/backward playing. Note: When fast
backward/forward playback reaches the previous or next track, the unit will resume normal playback.
- / + 10 files
Press 5/ 10-, 6/ 10 + buttons on remote control to jump to previous/next 10 files.
Repeat playback
Press 2/REPEAT on remote control or press BAND button on the panel repeatedly to choose repeat Play,
then press OK to confirm to play track repeatedly, press again to cancel.
Note!
After finishing playing all tracks or all folders of CD/MP3/SD, the unit restarts playing all tracks or
all folders automatically.
Intro
Press 3/INT button on remote control or press BAND on the panel to choose INT Play, then press OK to
confirm to activate INTRO function which will play the beginning of every track for 10 seconds.
Random
In disc mode press 4 or press BAND on the panel to choose RDM Play, then press OK to confirm to
activate random playing mode, press one more time to return to normal playing.
