CD OPERATION
USEFUL TIPS FOR LOADING & UNLOADING A CD
FOLLOW THE ARROW DIRECTIONS FOR
LOADING/UNLOADING THE CD.
DO NOT PRESS THE CD TRAY FROM THE
MIDDLE TO UNLOAD A CD THIS COULD
DAMAGE THE CD MECHANISM.
GENERAL OPERATION
PLAY / PAUSE
SKIP +
&
SKIP -
STOP
Press to start playing CD.
Press again to stop playing CD operation temporarily.
Press again to resume playback.
Press to go to the next track or back to the previous track.
Press and hold while playing until you find the point of the sound.
Press to stop all CD operation.
AUTOMATIC STANDBY SWITCHING
To comply with the “ERP2 (Energy Related Products)” Eco-design Directive (2009/125/EG), its aim is
to reduce the energy consumption of energy-using products; the device automatically switches to
standby after approx. 10 minutes without a signal. To use the device again, switch the device off and
then on again.
PLAYBACK
1.
Set the “FUNCTION” selector to “CD” mode.
2.
Open the CD door and place a CD with the label up in the CD compartment.
3.
Close the CD door.
4.
A focus search is performed if a disc is inside. The total number of tracks is read and appears in the display.
5.
Press the “PLAY / PAUSE” button to start playing CD.
6.
Adjust the “VOLUME” control to the desired level.
7.
Press the “PLAY / PAUSE” button again when you want to stop playback temporarily.
8.
Press the “STOP” button when finished.
FOLLOW UPWARD ARROW FOR UNLOADING CD
FOLLOW DOWNWARD ARROW FOR LOADING CD
E-6