Power:
Short press: Power on.
Short press: Change the mode (DAB/FM).
Short press when the Alarm sounds: Alarm off
Long press: Standby mode (when using mains power).
Long press: Power off (when using battery power).
Preset:
Long press: Store DAB or FM radio presets (10 DAB/10 FM). Press Select to confirm.
Short press: Recall stored DAB or FM radio presets. Press Select to confirm.
Select:
Short press: Select a displayed DAB radio station in the station list/Select or confirm an option in
the Menu/Confirm or Select a radio Preset.
Short press when the Alarm sounds: Activates a 10 minute Snooze.
Vol+
Short press: Increase the volume in steps.
Long press: Progressively increase the volume.
Vol-
Short press to decrease the volume in steps.
Long press to progressively decrease the volume.
Menu
Long press: Enter the Menu options.
Short press: Change the displayed radio station information.
Short press within the menu: Steps back and exits the Menu.
Tune
Short press in DAB mode: Moves back through the DAB station list.
Short press in FM mode: Moves down the frequency band in 0.05MHz steps.
Short press in the Menu: Moves through the Menu options.
Short press in Preset Store or Recall: Moves through the presets (1-10)
Long press in FM mode: Scans down the frequency band.
Tune
Short press in DAB mode: Moves forward through the DAB station list.
Short press in FM mode: Moves up the frequency band in 0.05MHz steps.
Short press in the Menu: Moves through the Menu options
Short press in Preset Store or Recall: Moves through the presets (1-10)
Long press in FM mode: Scans up the frequency band.
Telescopic antenna:
Fully extend the antenna before you scan for DAB or FM stations.
Battery option:
Requires
4 x AA alkaline batteries (not supplied).
Power socket
3.5mm Stereo Headphone socket
Setting an Alarm
In DAB or FM mode:
1.
Long press the Menu button to enter the Menu options.
2.
Short press the Prev or Next buttons to scroll to ‘<System>’. Short press the Select button.
3.
Short press the Tune and Tune buttons to scroll to ‘<Alarm>’. Short press the Select button.
4.
‘<Alarm 1> is displayed’. Short press the Select button or use the Tune and Tune button to scroll to
‘<Alarm 2>’ (if required) and short press the Select button.
5.
‘Alarm 1 (or 2) Setup’ is displayed. Short press the Select button. ‘Alarm 1 (or 2) Wizard On time’ is displayed
and the hour digits for the alarm will flash.
6.
Use the Tune and Tune buttons to scroll and short press the Select button to change and confirm the
alarm time, each alarm option and setting.
7.
When you have completed the Alarm set up, ‘Alarm 1 (or 2) Wizard’ is displayed again, together with ‘Alarm
Off (or On)’.
8.
Use the Tune and Tune buttons to choose ‘Alarm On’ or ‘Off’ and short press the Select button. ‘Alarm
Saved’ is displayed.
Stop the Alarm
When the alarm sounds, short press the Power button, ‘Alarm off’ is displayed. Alternatively, you can short press
the Select button to Snooze (see Snooze function below).
Snooze
When the alarm sounds, you can short press the Select button to snooze for 10 minutes. A snooze time
countdown will be displayed until the alarm sounds again.
1
2
3
4
5
6
7
8
1
2
4
5
6
7
8
3
12
9
10
11
9
10
11
12
