8
IV) COPYING OF MP3 FILE
IF PUTTING A MP3 DISC INSTEAD OF A CD-DISC, THE SYSTEM WILL COPY THE FILES TO THE USB IF PRESS
THE “ REC “ BUTTON. THE OPERATION PROCEDURES IS SAME AS CD ENCODING AS STIPULATE ON ABOVE,
AND THE SYSTEM WILL SWITCH TO COPYING MODE ONLY IF MP3 FILE BEING READ.
B) PHONO ENCODING
1)
SET THE FUNCTION BUTTON TO “ PHONO “ MODE AND THEN PRESS THE “ REC “ BUTTON DIRECTLY.
2)
THE LCD DISPLAY WITH SHOW THE WORD “
USB
“ AND THEN FLASHING, AND THEN DISPLAY “
“ & “
“ AND FLASHING AFTER FEW SECONDS. NOW THE SYSTEM IS STARTING THE ENCODING
MODE.
3)
START PLAYBACK AT PHONO FOR THE TRACK WHICH YOU WANT TO RECORD TO USB.
4)
AFTER FINISH OF RECODING, PRESS AND HOLD THE “REC“ BUTTON (11) UNTIL THE LCD STOP
FLASHING AND RETURN TO “ PHONO “ MODE.
C) ENCODING BITRATE (BY REMOTE HANDSET)
YOU CAN SELECT THE DESIRED BITRATE DURING ENCODING FROM CD OR PHONO TO USB, THE
SELECTABLE RANGE FROM 32 / 64 /96 /128 / 192 / 256 KBPS.
1) SET IN “PHONO “FUNCTION(18)&REMAIN STOP MODE.
2) PRESS THE “ INFO “ FUNCTION AND THE LCD DISPLA WILL SHOW THE DEFAULT BITRATE (128 KBPS)
3) PRESS
SKIP OR
BUTTONS (21) TO SELECT THE DESIRED BITRATE FOR ENCODING.
4) PRESS AGAIN THE “ INFO “ TO CONFIRM THE SETTING AND THE LCD DISPLAY (4) RESUME TO “ PHONO
“ MODE
D)TRACK SEPARATION (BY REMOTE HANDSET)
YOU CAN DIVIDE THE RECORDING MUSIC FROM PHONO TO USB/SD TRACK BY TRACE DURING ENCODING.
EVERY TIME WHEN PRESS THE “
“ (TRACK SEPARATION) BUTTON ONCE AT REMOTE HANDSET DURING
ENCODING FROM PHONO TO USB/SD, THE SYSTEM WILL GENERATE A NEW TRACK AND CONTINUOUS THE
RECRODING. THE TEXT “ PHONO “ AT LCD DISPLAY WILL FLASHING ONE TIME, IT MEAN THE UNIT IS
CREATING A NEW TRACK SUCCESSFULLY.
FILE DELETE AT USB/SD CARD (BY REMOTE CONTROL)
THE SYSTEM IS ABLE TO ERASE THE FILE STORED INSIDE THE USB PEN DRIVE OR SD CARD BY
FOLLOWING:-
A) SINGLE FILE DELETE
1
．
PRESET AT “ USB “ OR “ SD “ MODE.
2
．
PRESS AND HOLD THE “ INFO “ BUTTON FOR 3 SECONDS AND THE LCD DISPLAY (4) WILL SHOW (DEL
---001)
3
．
PRESS SKIP FORWARD
OR SKIP BACKWARD
BUTTON TO SELECT THE FILE GOING TO DELETE
4
．
PRESS THE “ REC “ BUTTON TO ENTER “ YES / NO “ MODE AND THEN PRESS SKIP FORWARD
OR
SKIP BACKWARD
TO SELECT “ YES “ OR “ NO “.
5
．
PRESS THE “ REC “ BUTTON AGAIN TO CONFIRM THE SETTING.
B) ALL FILES DELETE
1. PRESET AT “ USB “ OR “ SD “ MODE.
2. PRESS AND HOLD THE “ INFO “ BUTTON FOR 3 SECONDS AND THE LCD DISPLAY (4) WILL SHOW (DEL
---001)
3. PRESS AND HOLD THE “ INFO “ BUTTON TO ENTER “ YES / NO “ MODE AND THEN PRESS SKIP
FORWARD
OR SKIP BACKWARD
TO SELECT “ YES “ OR “ NO “.
4. PRESS THE “ REC “ BUTTON AGAIN TO CONFIRM THE SETTING.
REMOVING OF USB / MEMORY CARD
TO REMOVE THE USB, TURN OFF THE POWER OR SWITCH THE FUNCTION MODE TO EITHER CD OR TUNER
FIRST. FOR USBPORT – UN-PLUG IT BY PULLING OUT THE USB SOCKET DIRECTLY.
PHONO
NOTED:
-
REMOVE THE STYLUS PROTECTOR.
-
BE SURE THAT THE TONE ARM IS BEING DETACHED FROM THE TONE ARM
REST BEFORE OPERATING AND RE-SECURED AGAIN AFTERWARDS.
1. SELECT TO “ PHONO ” FUNCTION FROM FUNCTION SELECTOR (18)
2. SET THE SPEED SELECTOR TO THE PROPER POSITION DEPENDING ON THE RECORD TO BE PLAYED.
3. PLACE THE RECORD ON THE PLATTER (USE THE SPINDLE ADAPTOR IF REQUIRED).
