Groov-e GV-PS933, Инструкция по эксплуатации

Страница: 5 / 8

5
This apparatus provides three dynamic range modes to match different program types in DAB mode.
1. In DAB mode, press “Menu/Mem/clk ‐ adj” button (12) to enter the “Menu”, then press Skip down (11) or Skip up
(19) button to select “DRC”.
2. Press “Stop/Enter” button (10) to enter the “DRC” setting, then press Skip down (11) or Skip up (19) button to
select “DRC high/low/off” mode. Then press “Stop/Enter” button (10) to confirm the setting.
3. In any state press “Menu/Mem/clk ‐ adj” button (12) to quit the setting mode
Preset stations
You can store up to 20 radio stations in the memory (10 ‐ FM/10 ‐ DAB).
1. Set to FM/DAB mode
2. Turn to the desired radio station by “manual” or “auto” tuning method.
3. Press and hold the “Mem/clk ‐ adj” button (12) to enable memory state.
4. Press Skip down (11) or Skip up (19) button to select the desired station memory for storage.
5. Press “Stop/Enter” button (10) to confirm the setting.
6. Repeat step 2 to 5 to store other stations.
Recall preset stations
1. Set to FM/DAB mode
2. Press Pre ‐ up button (20) to recall the stored station.
3. Press Skip down (11) or Skip up (19) button to select the desired recall station.
4. Press “Stop/Enter” button (10) again to confirm the recall station.
DAB/FM reset:
If you would like to erase all the FM/DAB staions stored.
1. Set in DAB or FM mode, press “Menu/Mem/clk ‐ adj” button (12) to enter the “Menu”, then press Skip down (11) or
Skip up (19) button to select “System”.
2. Press “Stop/Enter” button (10) to enter the “System” setting, then press Skip down (11) or Skip up (19) button to
select “Factory reset”. Then press “Stop/Enter” button (10) to confirm the factory reset.
3. Apparatus will then erase all the stored stations.
Playing CD/MP3 disc

Getting started
1. Press the Function button (9) to select CD mode.
2. Open the CD door by pressing the CD door open/close (7). Put a CD disc into the compartment and close the CD door.
3. A search is performed if a disc is inside. Total number of tracks is read.

Play/pause mode
1. If Play/Pause button (18) is pressed during stop mode, the first track will be played.
2. If Play/Pause button (18) is pressed during playback, the system will go into pause mode and the pause indicator will
light up in the LCD display (8). Press again to resume normal playback.

Stop mode
1. If Stop button (10) is pressed during play or pause mode. The unit will go into stop mode and display the total number of
track in the LCD display (8).

Skip mode (skip up /skip down )
1. During play mode, if skip up button (19) is pressed it will go to next track and display the track number.
2. During play mode, if Skip down button (11) is pressed, it will go back to the beginning of the track, same track number.
3. After step 2, press skip down button (11) again, it will go to the previous track and play the beginning of the track.

CD bookmark feature
This unit has a CD bookmark feature, which allows you to resume the CD playback from the exact point that
it was suspended from an unexpected power off or change of mode. Just power on the unit, and switch to
CD mode, the CD will resume the playback from the previous point.

For MP3 disc/file
1. Place the MP3 ‐ CD in the CD compartment. After a search is performed the total number of tracks will be shown on the LCD
display (8).
2. Press Skip up or Skip down (11/19) button to select the track number.
3. When the desired track and album is being selected, press the “Play/Pause ” button (18) to start playback.
4.
Remark
-
Press “Folder up ” button (20) on the main unit to select the MP3 folder upwardly.
-
The track number will display on the LCD (8) and then it will play that track when you press Play/Pause button (18).

Repeat/Random mode