Instructions
Power On/Off
1. Insert the power adaptor into the POWERPORT on the back of the radio
and connect the other end to a power outlet. The unit will turn on and
automatically set the time.
2. Press the
POWER
button to turn on the Radio.
3. Press the
SOURCE
button to change between modes
.
NOTE:
To return to standby mode, press the POWER button again
DAB/DAB+ Operation
1. Press the
SOURCE
button until DAB/DAB+ mode is selected.
2. If this is your first use, or you've moved to a new area, press the
SCAN
Button to automatically scan for local stations.
3. To change between stations, rotate the
TUNE/SELECT
dial to scroll
through the available stations. Once the preferred station has been found,
press the
TUNE/SELECT
button.
4. Use the
VOLUME
dial to adjust to your desired level.
NOTE:
•
You can press the
INFO
button to display additional information.
•
If an alarm has been set, an alarm icon is shown on the clock display.
Dynamic Range Control {DRC)
In DAB mode:
Changing the dynamic range can affect the loudness and quality of the radio
program that you are listening to, so that it will be more suited to your listening
conditions and your own personal listening requirements. E.g. In a noisy
environment, where quiet sounds might be difficult to hear, setting the
compression to maximum will boost he quiet sounds, whilst keeping the loudest
sounds at their original level.
There are 3 levels of compression:
DRCOff :
no compression. This is the de fault setting.
DRCLow:
medium compression.
DRCHigh:
maximum compression.
