WWW.gronomics.com
East Bethel, MN USA
763-753-7374
Umbrella Stand w/Mounting Plate
(28” x 28” x 16”H)
Assembly Instruction
Continued
Parts List
ITEM
QTY.
PART #
DESCRIPTION
1
1
USMP
Umbrella Stand/Mounting Plate
2
4
RSS14-212ZY
GRK RSS Screws, 1/4” x 2-1/2”
3
2
3/8” x 2-3/4”
w/Nut
Bolt, 3/8” x 2-3/4”, w/Nut
Packaged & Inspected by
:
Date:
The Umbrella Stand/Mounting Plate can be used with
the PTBT 39-39 - Picnic Table Bar Top, purchased
separately.
If any pieces are missing or replacement parts are
required, contact Gronomics at 1-855-299-6727.
NOTE: It is recommended to place a protective layer
between the ground and the pieces during assembly.
This will help prevent damage to the pieces.
Parts Identification
Item #: USMP 28-28
1
1
2
Torx® T25
3
Assembly
2
Lay the Picnic Table Bar Top on its side.
NOTE: Make sure to lay something underneath the table
to prevent scratching the wood.
Align the Umbrella Stand w/Mounting Plate (Item 1) with
all four legs of the Picnic Table Bar Top.
Install four 1/4” x 2-1/2” screws (Item 2) in the pre-drilled
holes on the mounting plate.
1
2
2
2
2
