www.gronomics.com
East Bethel, MN USA
763-753-7374
Install two 14” x 5-1/4” side rails (Item 3) (with the groove down) into the
slots and slide down to the bottom of the slots.
6
Bottom Board and Fabric Installation
Place one 15” x 5-1/2” corner notched bottom board (Item 7) on each
end of the garden bed.
Place six 15” x 5-1/2” bottom boards (Item 8) into the garden bed. (Gap
boards evenly to allow for water drainage).
Place fabric liner into the garden bed.
Soil Depth: approximately 12-1/2”
Soil Capacity: 3 Cubic Feet
3
End Rail Assembly
3
3
7
8
4
Narrow Center Side Rail Assembly
Install two 31” x 2-1/2” side rails (Item 4) into the slots on each side of
the garden bed and slide down.
Install two 14” x 2-1/2” side rails (Item 5) into the slots on each end of
the garden bed and slide down.
4
5
5
5
Final Side Rail Assembly
Install two 31” x 5-1/4” side rails (Item 6) (one with Logo) into the slots
on each side of the garden bed and slide down.
Install two 14” x 5-1/4” side rails (Item 3) into the slots on each end of
the garden bed and slide down.
Logo
6
3
3
7
Post Cap Assembly
Remove the rubber cap from the corner posts studs.
Align the hole of the 4” x 4” post cap (Item 9) with stud and tighten until
the cap makes contact with the post.
NOTE: Do not overtighten.
Repeat procedure on all posts.
Rubber Cap
Stud
9
