5
Connect supplied
Interface Cable MCFTEN and Video Cable
VTEN to the back ot the stereo
Locate
24-pin video port at the back of the stereo, as shown below. Dis-
connect the cable that was previously connected, connect VTEN
.
Reconnect
disconnected cable back to the VTEN cable.
Locate 28-pin and 10-pin connectors at the back of the stereo. Disconnect
what was previously connected, and connect MCFTEN cable to both corres-
ponding ports at the back of the stereo. Reconnect previously disconnected
factory cables back to the MCFTEN cable.
