5
Connect supplied
Interface Cable MCFHA3, Video Cable
VHON3D, and USB cable WLTOYUSB to the back ot the
stereo
Locate G
RAY video port at the back of the stereo, as shown below. Dis-
connect the cable that was previously connected, connect VHON3D cable
.
Reconnect disconnected cable back to the VHON3D cable.
Locate 14-pin
G
RAY connectors at the back of the stereo. Disconnect what
was previously connected, and connect
MCFHA3
cable to the back of the
stereo. Reconnect previously disconnected factory cables back to MCFHA3
cable.
Connect
WLTOYUSB
cable to the back ot the stereo, as shown below. If
there was something connected at the back of the stereo to the correspond-
ing port, disconnect it. This is the connection for
factory USB
that will be
disconnected upon the installation of VLine.
