1
1
2.1 Initializing
After connecting the VLine module to the stereo,
and reconnecting all
unplugged connectors back to the vehicle,
an
i
gnition
c
ycle will have to be
performed for the stereo to discover V
Li
ne and allow V
Li
ne to self config-
ure.
To INITIALIZE:
1. Put Ignition Switch to “ACC” or “ON” position
2. Wait up to 5 Seconds
3. Put Ignition Switch to “OFF” position
4. Wait 1 minute
5. Turn Ignition Switch back to “ACC” or “ON” Position
6. Press the A
UX
button until you are able to select the VLINE interface.
(may take more than 2 presses of the A
UX
for accessing as first press is
for built-in CD/DVD changer in most cases)
2.2 Functions
N
o factory functions of the stereo will be disabled. Factory Bluetooth,
Navigation, Radio and CD player will remain functional.
Selecting the VLINE mode:
Press the A
UX
button to access the V
Line mode
of the stereo to enter
into VLINE interface mode
. You
may need to press
AUX
few times
.
Continue on the next page --->
CHAPTER 2 — GETTING STARTED
