18
When the
Steam
function is activated the
warming-up phase starts. (
Steam
icon remains
inactive until preconfigured temperature is
reached).
45 minutes after a steam bath the steam
generator’s automatic cleaning routine starts.
After that the steam generator is out of operation
for 20 minutes.
During this time the
Steam
icon is inactive.
Press the Steam icon to view the remaining
cleaning time in minutes. When the automatic
cleaning routine has finished the
Steam
icon
reactivates.
Limescale must be removed regularly.
After 130 hours (a fixed setting) removal of
limescale is possible or prior to 130 hours a
manual removal of limescale can be carried out.
When the timer runs out the steam generator
locks.
The
Steam
icon is inactive.
Press the
Steam
icon.
Press the
Please
Service icon to start the
warming-up phase for the removal of limescale.
The steam generator heats up.
Hot
steam can
emerge from the steam outlet.
After 20 minutes the warming-up phase for the
removal of limescale stops.
The
Please Service Now
icon appears.
The
overall system may not be
disconnected
from the mains.
You can now run the limescale removal routine
for the steam generator. For more information on
this procedure see the technical product
information for the steam generator.
Service
Automatic cleaning
Removing limescale
Timer expired:
(130h)
Note:
During limescale
removal Profile
and Hotel Mode
are blocked.
Limescale
removal
cannot
be started in Hotel
Mode.
