background image

OM/SM-TDB/7(CE)

2

IMPORTANT — READ FIRST — IMPORTANT

THESE  APPLIANCES  MUST  BE  INSTALLED BY A COMPETENT PERSON IN CONFORMITY WITH THE
INSTALLATION AND SERVICING INSTRUCTIONS AND NATIONAL REGULATIONS IN FORCE AT THE TIME.
PARTICULAR ATTENTION MUST BE PAID TO THE FOLLOWING:

I. E. E. REGULATIONS FOR ELECTRICAL INSTALLATIONS

ELECTRICITY AT WORK REGULATIONS

HEALTH AND SAFETY AT WORK ACT

FIRE PRECAUTIONS ACT

LOCAL AND NATIONAL BUILDING REGULATIONS

USERS SHOULD BE CONVERSANT WITH APPROPRIATE PROVISIONS OF THE FIRE PRECAUTIONS ACT.
IN PARTICULAR THEY SHOULD BE AWARE OF THE NEED FOR REGULAR SERVICING BY A COMPETENT
PERSON TO ENSURE CONTINUED SAFE AND EFFICIENT APPLIANCE PERFORMANCE.

WARNING:

TO PREVENT SHOCKS, APPLIANCES WHETHER GAS OR ELECTRIC, MUST BE EARTHED.

UPON COMPLETION OF INSTALLATION, THE OWNERS MANUAL SHOULD BE HANDED TO USERS AND
THE  INSTALLER  SHOULD  INSTRUCT  RESPONSIBLE  PERSON(S)  IN  THE  CORRECT  OPERATION  AND
MAINTENANCE OF THE APPLIANCE.

THIS  EQUIPMENT  IS  ONLY  FOR  PROFESSIONAL  USE,  AND  SHALL  BE  OPERATED BY QUALIFIED
PERSONS. IT IS THE RESPONSIBILITY OF THE SUPERVISOR OR EQUIVALENT TO ENSURE THAT USERS
WEAR  PROTECTIVE  CLOTHING,  AND  TO  DRAW  ATTENTION  TO  THE  FACT THAT, SOME PARTS WILL,
BY NECESSITY, BECOME VERY HOT AND WILL CAUSE BURNS IF TOUCHED ACCIDENTALLY.

UNLESS OTHERWISE STATED, PARTS WHICH HAVE BEEN PROTECTED BY THE MANUFACTURER ARE
NOT TO BE ADJUSTED BY THE INSTALLER.

BEFORE ATTEMPTING ANY SERVICING, ENSURE THAT THE ELECTRICAL SUPPLY IS DISCONNECTED.

WARNING:

THE  UNIT  MUST  BE INSTALLED BY PERSONNEL QUALIFIED TO WORK WITH
ELECTRICITY.  IMPROPER INSTALLATION CAN RESULT IN INJURY TO PERSONNEL
AND/OR  DAMAGE  TO  EQUIPMENT.  THE UNIT MUST BE INSTALLED IN ACCORDANCE
WITH APPLICABLE CODES.

CAUTION:

SHIPPING STRAPS ARE UNDER TENSION AND CAN SNAP BACK WHEN CUT.

WARNING:

TO  AVOID  DAMAGE  OR  INJURY, FOLLOW THE WIRING DIAGRAM EXACTLY WHEN
CONNECTING A UNIT.

WARNING:

BEFORE  CLEANING  THE  OUTSIDE  OF  THE  KETTLE,  DISCONNECT  ELECTRIC  POWER .
KEEP WATER AND SOLUTIONS OUT OF CONTROLS AND ELECTRICAL COMPONENTS.

NOTICE:

DO NOT USE ANY DE-GREASER THAT CONTAINS POTASSIUM HYDROXIDE OR SODIUM
HYDROXIDE OR THAT IS ALKALINE.

WARNING:

USE  OF  ANY  REPLACEMENT  PARTS  OTHER  THAN  THOSE  SUPPLIED  BY  GROEN  OR
THEIR  AUTHORIZED  DISTRIBUTOR  VOIDS  ALL  WARRANTIES  AND  CAN RESULT IN
BODILY  INJURY  TO  THE OPERATOR AND DAMAGE THE EQUIPMENT.  SERVICE BY
OTHER THAN FACTORY-AUTHORIZED PERSONNEL WILL VOID ALL WARRANTIES.

WARNING:

HIGH VOLTAGE EXISTS INSIDE CONTROL COMPARTMENTS. DISCONNECT FROM
BRANCH BEFORE SERVICING.  FAILURE TO DO SO CAN RESULT IN SERIOUS INJURY OR
DEATH.

CAUTION:

BE

 

SURE

 

ALL

 

OPERATORS

 

READ,

 

UNDERSTAND

 

AND

 

FOLLOW

 

THE

 

OPERATING

INSTRUCTIONS,

 

CAUTIONS,

 

AND

 

SAFETY

 

INSTRUCTIONS

 

CONTAINED

 

IN

 

THIS

 

MANUAL.

WARNING:

THIS  UNIT  IS  INTENDED  FOR  USE  IN  THE COMMERCIAL HEATING, COOKING AND
HOLDING  OF  WATER  AND FOOD PRODUCTS, PER THE INSTRUCTIONS CONTAINED IN
THIS  MANUAL.  ANY  OTHER  USE  COULD  RESULT  IN  SERIOUS PERSONAL INJURY OR
DAMAGE TO THE EQUIPMENT AND WILL VOID WARRANTY.

Содержание TDB/7





























Отзывы: