Groen D - 40/60/80 TA/3, Руководство оператора

Страница: 10 / 20

10 OM-TA/3
Troubleshooting
Your Groen Mixer will operate smoothly and efficiently if properly maintained. However, the following is a list of checks to make in
the event of a problem. If the actions suggested do not solve the problem, call your authorized Groen Service Representative. For the
phone number of the nearest agency, check the Unified Brands web site at unifiedbrands.net, ask your area Groen representative or
call the Groen Parts and Service Department. If an item on the list is followed by X, the work should only be performed by a
qualified service representative.
WARNING
USE OF ANY REPLACEMENT PARTS OTHER THAN THOSE SUPPLIED BY GROEN OR THEIR AUTHORIZED DISTRIBUTORS
CAN CAUSE INJURY TO THE OPERATOR AND DAMAGE TO THE EQUIPMENT AND WILL VOID ALL WARRANTIES.
SERVICE PERFORMED BY OTHER THAN FACTORY-AUTHORIZED PERSONNEL WILL VOID ALL WARRANTIES.
SYMPTOM WHO WHAT TO CHECK
X indicates items which must be performed by an authorized technician.
Motor will not run. User a. Power supply to the unit.
b. For a mechanical overload. (example: frozen product)
c. Circuit breaker or fuse.
Authorized
Service Rep Only
d. That the tilt switch is closed. X
e. For a ground or short in the motor. X
f. Overload heaters. X
Motor runs slowly. User a. For a mechanical overload.
Authorized
Service Rep Only
b. For open motor field circuit, by checking field current. X
Motor speed varies
rapidly.
User a. For an oscillating load, by disconnecting the mixer drive from the
agitator and checking motor speed.
Authorized
Service Rep Only
b. Variable speed controller X
Motor overheats and/or
sparks excessively.
User a. For a mechanical overload.
b. Ambient temperature is high.
Authorized
Service Rep Only
c. Incorrect supply voltage to motor. X
d. Excessive variation (under voltage or over voltage) in supply voltage.
X
e. Single phasing due to loose connection in supply line or a blown
fuse. X
Circuit breaker or heater
cuts out frequently.
User a. For air in the jacket. See “Jacket Vacuum” in the “Maintenance”
section of this manual.
Authorized
Service Rep Only
b. Whether line voltage is too high. X
c. Motor armature and wiring for ground or short. X
d. For open motor field circuit, by checking field current. X
e. For defective circuit breaker. X
f. Motor improperly connected. X
Troubleshooting guidance for the kettle component of your cooker/mixer is contained in the separate kettle manual.