-2-
Model T33276 (Mfg. Since 4/22)
2. Remove casters and hardware from bottom
drawer.
3. With help from another person, lay back of
tool chest flat on floor.
Note: We recommend sweeping the floor
clean and laying down a piece of cardboard
or blanket to prevent scratching the finish
during this step.
Figure 3. Example of handle installed.
x 4
Handle
(1 of 2)
Assembly
1. Attach handle to each side of tool chest with
(4)
1
⁄
4
"-20 x
1
⁄
2
" hex bolts (see
Figure 3). Do
not over-tighten!
Needed for Setup
Description Qty
•
Additional Person ....................................... 1
•
Open-End Wrenches
7
⁄
16
",
9
⁄
16
" ..............1 Ea.
Figure 4. Example of caster installation.
x 16
Caster
(1 of 4)
4. Attach each caster using (4)
3
⁄
8
"-16 x 1" hex
bolts (see
Figure 4).
Note: Install swivel casters on right side of
tool chest.
5. Return tool chest to upright position.
Figure 5. Rail installation.
6. Attach (4) rails to tool cabinet with (4)
1
⁄
4
"-20
x
1
⁄
2
" hex bolts for each rail (see
Figure 5).
x 16
Rail
(1 of 4)
Note: Before tightening hex bolts, make sure
to slide rails up so that hex bolts sit in bottom
of rail slots.
